Description:
1. Charing Voltage: DC 4.2-5 V DC / CV
2. Single Battery Current Consumption: <= 6uA Continuous Current 2.7A Current
3. Overload Rated Voltage: 4.2 V +/- 0.025 V
4. Delay Delay Overload: 150-500 MS
5. Overload Reset Voltage: 4.0 V +/- 0.025 V
6. Overdischarging Detection Voltage: 2.75 V +/- 0.1 V
7. Overdischarging Detection Delay: 50-150 ms
8. Overdischarge Reset Voltage: 2.9 V +/- 0.10 V
9. Overcurrent Detection Voltage: 150 +/- 30mv
10. Current Overcurrent Current: 4.5 +/- 0.5A
11. Overcurrent Detection Delay Time: 5 ms-15 ms
12. Overcurrent Restore Type: Automatic Restore Circuit
13. Short Detection Status: External Short Circuit Circuit
14. Short Time Delay Detection: <= 50us
15. Short Circuit Restore State: Automatic Restore
16. Internal Resistance: MOSPET <= 40 m ohms
17. Operating Temperature Range: -40- + 50 Degrees Celsius Storage Temperature: -40- + 90 Degrees Celsius
19. Size: 28 * 3.8 * 1.2mm
20.With One Cell Lithium-ion/Polymer Battery Protection IC DW01-P and N-Channel MOSFET 8205A
Features:
1. Connect Teminal Battery Charger Adapt High-Voltage Instrument
2. Internal 3 Phases detectiton overcurrent circuit (overcurrent 1, overcurrent 2, short circuit of the load)
3. MOS tube that can control charge and discharge of the battery
4. Wide Operating Temperature Range 5. Low Power Consumption
Welding Point Introduction:
1. B +: Connect with positive power
2. B-: Connect with negative power
3. P +: connect with positive charge / recharge (common port charging / discharge port used)
4. P-: connect with negative charge / discharge port (common port charging / discharge port used)
Package Included: 1PCS*1S 3.7V 2.5A Lithium Batterry Protection Board Polymer BMS PCM PCB Li-ion Module
