3.5 inch 480*320 TFT LCD Module Screen Display ILI9486 Controller for Arduino UNO MEGA2560 Board
A-With Touch Panel
B-Without Touch Panel
Dimansions: 86.8mmX57.4mm
Pin description of the ILI9486 Display module below:
Pin Name Pin Description
LCD_RST LCD bus reset signal, low-level reset
LCD_CS LCD bus chip select signal, low level enable
LCD_RS LCD bus command/data selection signal
LCD_WR LCD bus write signal
LCD_RD LCD bus read signal
GND Power ground
5V 5V power input
3V3 3.3V power input, this pin can be disconnected
LCD_D0 LCD 8-bit data Bit0
LCD_D1 LCD 8-bit data Bit1
LCD_D2 LCD 8-bit data Bit2
LCD_D3 LCD 8-bit data Bit3
LCD_D4 LCD 8-bit data Bit4
LCD_D5 LCD 8-bit data Bit5
LCD_D6 LCD 8-bit data Bit6
LCD_D7 LCD 8-bit data Bit7
SD_SS SD card SPI bus chip select signal, low level enable
SD_DI SD card SPI bus MOSI signal
SD_DO SD card SPI bus MISO signal
SD_SCK SD card SPI bus clock signal
74LVC245A-OCTAL BUS TRANSCEIVER WITH 3 STATE OUTPUTS TSSOP-20
AMS1117
